MULTI-USE RADIO SERVICE (MURS) TRANSCEIVER

IC-V10MR

Professional Grade
License-Free Radio

Multi-Use Radio Service (MURS) Transceiver
The V10MR is a professional-grade, license-free radio that is ready for any kind of operation. Take advantage of the extensive communication range*: up to 250,000 square feet in buildings, 20 floors, and up to two miles in a traditional worksite. The long battery life can last up to 14 hours. This radio is suited for service, education, health, tourism, personal use, and more! *Ranges may differ depending on the operating environment.

Tough and Waterproof License Free Radio for Professional Use

IP67 Waterproof

The IC-V10MR can be used under hard rain, and you can also wash the radio with clean water as instructed in the user manual.

Drop Test Durability

The IC-V10MR exceeds MIL-STD specifications and has passed more difficult drop tests (1.5 m; 4.9 ft x 6 surfaces) than specified for professional use.

Large Sound for Clear Audio

The combination of a custom high capacity speaker and large sound space in front of the speaker delivers a powerful 1500 mW audio with exceptional listening clarity.

Built-in Motion Sensor

With a built-in motion sensor, the IC-V10MR’s can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the radio is moving or shaking, for example, during a chase. The Lone Worker and Man Down functions are programmable.

Compact Size to Fit Your Palm

The radio size is a perfect fit at just 2.1 inches wide and 1.0 inches deep. And the weight is only 8.5 oz even when the battery pack is attached.

Signaling for Selective Call

2-Tone, MDC, CTCSS and DTCS capabilities to use selective call and reject un-intended calls for quiet stand-by.

Large Capacity Battery for Long Operation

A low power consumption design and the supplied 1570 mAh Lithium-Ion battery allow use of the radio for more than 16 hours*.
*5:5:90 duty ratio for transmit: receive: stand-by (with power save function)

Other Features

  • VOX function for hands-free operation 
  • Audio compander 
  • Siren sound for security alarm 
  • Surveillance function temporarily turns OFF the beep and LED indicator
  • Emergency call with open microphone function
  • Automatic scan

Communication Range

Up to 
250,000 sq ft
in a building*

Up to 
20 floors 
in a building*

Up to 
2 miles 
in a work site*

Communication range may differ depending on operating environment or weather conditions, etc.

SPECIFICATIONS

Usable Frequencies and (bandwidth)

151.820 MHz (11.25 kHz), 151.880 MHz (11.25 kHz),
151.940 MHz (11.25 kHz), 154.570 MHz (20.00 kHz),
154.600 MHz (20.00 kHz)

Number of Memory channels  16 ch
Transmit output power 2 W (High), 1 W (Mid), 0.5 W (Low)
Receiver sensitivity 0.25 μV (typical) for 12 dB SINAD
Squelch sensitivity 0.25 μV (typical) at squelch threshold point
Audio output power
(at 5% distortion, 8 Ω load)
Internal SP 1.5 W (typical)
External SP 0.4 W (typical)
Antenna impedance 50 Ω
Power supply Voltage 7.5 V
Current drain Receive stand-by 77 mA
Receive max. audio 500 mA
Transmit (High) 0.9 A
Dimensions (with BP-279) 52.2 (W) × 111.8 (H) × 24.5 (D) mm
2.1 (W) × 4.4 (H) × 1.0 (D) inches
Weight (with BP-279) 240 g; 8.5 oz (approximate)

All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603.

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Procedure
Simple explanation
(radio specifications are not changed after each test)
Low Pressure

500.5

I, II

Keep the transceiver 20℃/101.3 kPa and
25℃/57.2 kPa for a total of 7 hours
High Temperature

501.5

I, II

Keep the transceiver between 30 to 63℃ for a total of 168 hours
Low Temperature

502.5

I, II

Keep the transceiver at -25℃ for 4 hours
Temperature Shock

503.5

I-C

Keep the transceiver at -51℃/2 h and +71℃/2 h × 3 cycles (total 12 hours)
Solar Radiation

505.5

I

Keep the transceiver at 49℃ and 1120 W/m2 for 24 h × 3 cycles (for a total of 72 hours)
Rain Blowing/Drip

506.5

I, III

I : Blast 1.7 mm/min rain with 18 m/s wind for
30 min to 6 surfaces (for a total of 180 min)
III: Drip water 2800 l/m2/h for 15 min.
Humidity

507.5

II

Keep the transceiver at 95% humidity with 30℃ and 60℃ for 240 hours.
Salt Fog

509.5

-

Spray 5% salt water with 1-3 ml/h at 80 cm 2 under 35℃/95% condition for 24 hours then dry it under 24℃/50% condition × 2 cycles
Dust Blowing

510.5

I

Blowing talc powder Temp/time: 23℃/6 h and 60℃/6 h, humidity: less than 30%, wind speed: 8.9 m/s, powder density: 10 ±7 g/m3
Immersion

512.5

I

Keep the transceiver in pure water for 1 m / 30 min.
Vibration

514.6

I Vibrate the transceiver at each 3 axis (X, Y, Z), frequencies 5 – 500 Hz, 1.05 G for 1 hour
Shock

516.6

I, IV

When packing, drop 1.22 m height for
6 surfaces, 8 corners, 12 edges (total 26 drops)

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Supplied Accessories

  • Battery pack, BP-279
  • Belt clip, MB-133
  • Rapid charger, BC-213
  • AC adapter, BC-242
  • Antenna, FA-SC28V

Catalogs / Brochures

Brochures Name Size
Marine Products 6.48MB
IC-V10MR 2.91MB

Instruction Manual / Guides

Name Model Name Note
INSTRUCTIONS CS-V10MR
Operating Guide IC-V10MR
INSTRUCTIONS IC-V10MR

Firmware / Software

Type Model Name Version Last Update
Programming software CS-V10MR Revision 1.02 Jun.23.2021