VHF AND UHF DIGITAL TRANSCEIVERS

IC-F3262D
IC-F4262D

Series

Advanced IDAS™ Digital Handheld with Built-in GPS and Waterproof Protection

ZOOM
ZOOM
ZOOM
ZOOM
ZOOM

VHF/10-keypad/IDAS DIGITAL

IC-F3262DT

VHF/Simple key/IDAS DIGITAL

IC-F3262DS

UHF/10-keypad/IDAS DIGITAL

IC-F4262DT

UHF/Simple key/IDAS DIGITAL

IC-F4262DS

ZOOM
ZOOM
ZOOM
ZOOM
ZOOM
Open

IP67 Waterproof & Dustproof Protection

The IC-F3262D series provides protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

Man Down and Lone Worker Functions for Emergency Call

The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.

* Depending on the version.

800mW (typ.) Audio Output Power

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

Built-in GPS Receiver*

Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.

*Depending on the version.
*To graphically show the received position data, an external PC application is required.

14-pin Accessory Connector

The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speakermicrophone has a 1000mW (typ.) audio output for loud and clear communications.

Large Full Dot-Matrix LCD

Using a large full dot-matrix LCD (32 × 18mm), the IC-F3262D series shows two lines of easy-to-read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Long Lasting Battery Life

GPS type

Operating Time
Built-in GPS type 10.5 hours (approx.)
Non GPS type 12 hours (approx.)

* Digital mode typical operation in 5:5:90 duty cycle, power save on.

dPMR™ Features

The IC-F3262D series* meets dPMR standards (TS 102 658) and provides dPMR Tier 2 Mode 1/2/3 operation. The following dPMR features are programmable.

  • Individual/group call
  • All group call
  • Emergency
  • Call log
  • Status message
  • SDM (Short Data Message)
  • GPS
  • Stun, kill and revive
  • Digital voice scrambler
  • Transparent data mode

* dPMR version only.

Call Setup and Clear Down

The "Call setup and clear down" which is used in 5-Tone or BIIS signaling in analogue radios is implemented in the dPMR system. The IC-F3262D series confirms availability of the destination radio before you talk. 5-Tone or BIIS users can introduce dPMR without hesitation and avoid a new learning curve with these radios.

Transparent Data Modem Function

When IC-F3262D series is connected to a PC or other external equipment, the transparent data modem function allows communication in a 6.25kHz channel. It can be used for remote telemetry system control or data applications.

Built-in Voice Scrambler

The built-in inversion voice scrambler* provides secure conversation in analogue mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard.

* Inversion voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.

Status Messages

The IC-F3262D series has 32 programmable status messages. The status messages can be used as special functions to control the radio such as ambience listening (Auto TX), radio stun/kill/revive and GPS position reporting/request.

Other features

  • 512 memory channels with 128 zones
  • 5W output power both in VHF and UHF
  • Built-in 2-Tone, 5-Tone and BIIS 1200*
  • CTCSS/DTCS encoder/decoder*
  • MIL-STD 810 G rugged construction
  • 8 DTMF autodial memories
  • Tactical group function
  • Busy channel lockout, repeater lockout
  • Power on password
  • Time-out timer
  • Talk around function
  • Low battery alert
  • Escalating alarm
  • Surveillance function

(* = Analogue mode only)

General

IC-F3262DT/DS

IC-F4262DT/DS
Frequency coverage

136–174 MHz

400–470 MHz
Number of channels

512 channels/128 zones
Channel spacing

25/20/12.5/6.25kHz
Type of emission

16K0F3E/14K0F3E/8K50F3E/4K00F1E/F1D
Current drain
(approx.)		 Tx High (at 5W)

1.7A

1.8A
Rx Rated output

550mA
Standby

160mA
Dimensions (W×H×D)
(projections not included)

53.5×142.7×39.5 mm
(With BP-232WP)
Weight (approx.)

410g
(with BP-232WP,
MB-94R & FA-SC55V)

400g
(with BP-232WP,
MB-94R & FA-SC57U)

Transmitter

IC-F3262DT/DS

IC-F4262DT/DS
RF output power (at 7.5V DC)

5W, 2W, 1W
(Hi, L2, L1)
Spurious emissions

0.25μW (≤1GHz),
1.0μW (>1GHz)
Frequency stability

±1.0ppm
Audio harmonic distortion

1.5% typ. (AF 1kHz 40% deviation)
Residual modulation

48/47/42dB typ. (Wide, middle, narrow)
FSK error

2.0% typ.

Receiver

IC-F3262DT/DS

IC-F4262DT/DS
Sensitivity Analogue

−4dBμV emf typ. (at 20dB SINAD)
Digital

−8dBμV emf typ. (at 5% BER)
Adjacent channel selectivity

78/78/68/60dB typ. (Wide, middle, narrow, digital)
Spurious response rejection

76dB typ.
Intermodulation

67dB typ. (Wide, narrow)
73dBμ emf typ. (Digital)
AF output power
(at 5% distortion)

800mW typ. (Internal SP, 12Ω load)
1000mW typ. (External SP, 8Ω load)

GPS (Depending on version)

IC-F3262DT/DS

IC-F4262DT/DS
Receiver channels

12 channels
Time to first fix (cold start)

36 seconds typ. (at open sky)
Horizontal accuracy

5m (at open sky)

Function Comparison and Internal Unit Options

IC-F3262DT/DS
IC-F4262DT/DS
(IDAS dPMR version)

IC-F3262DT/DS
IC-F4262DT/DS
(IDAS NXDN version)
Number of option slots 0 0
CTCSS/ DTCS encoder Available Available
decoder Available Available
2-Tone encoder Available Available
decoder Available Available
5-Tone encoder Available Available
decoder Available Available
DTMF autodial Available Available
DTMF decoder Available Available
Voice Scrambler Analogue
(Inversion)		 Available Available
Digital Available Available
IDAS dPMR Tier 2 Mode1/2 Available -
Tier 2 Mode 3 Available -
IDAS NXDN Conventional - Available
Type-D trunking - Available
MPT 1327 - -
BIIS 1200 Available Available
MDC 1200 - Available
LTR™ trunking - Available
Man Down function Available
(Depending on version)		 Available
(Depending on version)
GPS Available
(Depending on version)		 Available
(Depending on version)
Intrinsically safe - -

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method, Proc.
Low Pressure Storage

500.5 I
Low Pressure Operation

500.5 II
High Temperature Storage

501.5 I
High Temperature Operation

501.5 II
Low Temperature Storage

502.5 I
Low Temperature Operation

502.5 II
Temperature Shock

503.5 I-C
Solar Radiation

505.5 I
Rain Blowing

506.5 I
Rain Drip

506.5 III
Humidity Induced

507.5 II
Salt Fog

509.5
Dust Blowing

510.5 I
Vibration

514.6 I
Shock Functional

516.6 I
Shock Transit Drop

516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standards (IC-F3262D/F4262D, BP-232WP and HM-184)
Dust & Water

IP67 (Dust-tight and waterproof protection)


All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Battery pack, BP-232WP
  • Belt clip, MB-94R
  • Antenna

Please note that a Battery charger must be purchaed separately.

Catalogs / Brochures

Brochures Name Size
IC-F3262D/IC-F4262D Digital Series 1.24MB
IDAS™ Solutions 2.43MB
IDAS™ Digital Simulcast 1.71MB

Instruction Manual / Guides

Name Model Name Note
PRECAUTIONS IC-F3162D/IC-F3262D, IC-F4162D/IC-F4262D series (dPMR)
Precautions (French) IC-F3260 series, IC-F4260 series
Instruction Manual IC-F3262DT, IC-F3262DS, IC-F4262DT, IC-F4262DS (dPMR)
Instruction Manual IC-F3262DT, IC-F3262DS, IC-F4262DT, IC-F4262DS (NXDN)