VHF AND UHF TRANSCEIVERS

IC-F3002
IC-F4002

New version

5 W Output Power Also in UHF,
1500 mW Loud Audio

ZOOM

VHF

IC-F3002

UHF

IC-F4002

ZOOM

Open

Simple operation for instant communication

The IC-F3002 series is so easy to use there’s no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.

Easy to hear in noisy areas

The radio provides 1500 mW* loud and clear audio with Icom custom high power handling capacity speaker. Clear communication is available even in noisy environments.
* Typical with internal speaker

Optional 1500 mW Speaker-Microphone, HM-222HLWP*

The combination of the optional HM-222HLWP and the IC-F3002 series* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.
* For the transceiver with a "U" mark on the serial number label.

Longer operating time

A new high efficiency FET of the IC-F3002 series reduces consumption current and provides up to 31 hours* of operating time with the BP-299, 3150 mAh (typical) supplied battery pack.
* TX: RX: Standby=5: 5: 90. Power save function ON.

Weather resistant, dust protection, military rugged

While the radio is a compact unit with a height of only 111 mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental tests. In short, the IC-F3002 series is built rugged!

Internal VOX capability for hands-free operation

The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.

Selective calling, quiet stand-by and more

2-Tone and 5-Tone signaling gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.

Other features

DTMF autodial
CTCSS/DTCS encoder/decoder
BIIS PTT ID transmission
MDC PTT ID and emergency
Low battery alert
2-step power save
PC programmable
Time out timer
Talk around function
Lone worker function
Enhanced emergency
3-color LED
Surveillance function

General

			IC-F3002	IC-F4002
Frequency range (Varies according to version)			136 MHz–174 MHz	400–470 MHz
Number of memory channels			16 channels
Type of emission			8K50F3E/14K0F3E/16K0F3E
Channel spacing			12.5/20/25 kHz
Power supply requirement			7.2 V DC
Current drain (approximate)	Tx	High	1.3 A	1.6 A
	Rx	Stand-by	75 mA	70 mA
	Rx	Max. audio	500 mA (Internal SP)
Antenna impedance			50 Ω
Operating temperature range			–25°C to +55°C (Radio only)
Dimensions (W×H×D) (Projections are not included)			58 × 111 × 35.5 mm (With BP-299)
Weight (approximate)			272 g (With BP-299)

Transmitter

	IC-F3002	IC-F4002
RF output power (at 7.2V DC)	5 W, 2 W, 1 W (Hi, L2, L1)
Max. frequency deviation	± 5.0 kHz/±4.0 kHz/±2.5 kHz (Wide/Middle/Narrow)
Frequency stability	±2.5 ppm
Spurious emissions	0.25 μW (≤ 1 GHz) 1.0 μW (> 1 GHz)
Residual modulations	58/56/53 dB typical (Wide/Middle/Narrow)	53/51/48 dB typical (Wide/Middle/Narrow)
Audio harmonic distortion (AF 1 kHz 40% deviation)	1.0%/1.0%/1.5% typical (Wide/Middle/Narrow)
Ext. microphone connector	3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ)

Receiver

		IC-F3002	IC-F4002
Sensitivity (at 20 dB SINAD)		–4 dBμV typical emf
Adjacent channel selectivity		78/78/70 dB typical (Wide/Middle/Narrow)	73/73/65 dB typical (Wide/Middle/Narrow)
Spurious response rejection		70dB (min.)
Intermodulation rejection		65 dB minimum
Hum and noise (With CCITT filter)		57/55/51dB typical (Wide/Middle/Narrow)	52/50/47 dB typical (Wide/Middle/Narrow)
Audio output power (at 5% distortion 8Ω load )	Internal SP	1500 mW typical
Audio output power (at 5% distortion 8Ω load )	External SP	400 mW typical 1500 mW typical (BTL, HM-222HLWP connected*)
Ext. speaker connector		Ext. speaker connector

* For the transceiver with "U" make on the serial number label.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	Method	Procedure	Simple explanation (radio specifications are not changed after each test)
Standard	MIL-810 G
Low Pressure	500.5	I, II	Keep the transceiver 20℃/101.3 kPa and 25℃/57.2 kPa for a total of 7 hours
High Temperature	501.5	I, II	Keep the transceiver between 30 to 63℃ for a total of 168 hours
Low Temperature	502.5	I, II	Keep the transceiver at -25℃ for 4 hours
Temperature Shock	503.5	I-C	Keep the transceiver at -51℃/2 h and +71℃/2 h × 3 cycles (total 12 hours)
Solar Radiation	505.5	I	Keep the transceiver at 49℃ and 1120 W/m2 for 24 h × 3 cycles (for a total of 72 hours)
Rain Blowing/Drip	506.5	I, III	I : Blast 1.7 mm/min rain with 18 m/s wind for 30 min to 6 surfaces (for a total of 180 min) III: Drip water 2800 l/m2/h for 15 min.
Humidity	507.5	II	Keep the transceiver at 95% humidity with 30℃ and 60℃ for 240 hours.
Salt Fog	509.5	-	Spray 5% salt water with 1-3 ml/h at 80 cm 2 under 35℃/95% condition for 24 hours then dry it under 24℃/50% condition × 2 cycles
Dust Blowing	510.5	I	Blowing talc powder Temp/time: 23℃/6 h and 60℃/6 h, humidity: less than 30%, wind speed: 8.9 m/s, powder density: 10 ±7 g/m³
Vibration	514.6	I	Vibrate the transceiver at each 3 axis (X, Y, Z), frequencies 5 – 500 Hz, 1.05 G for 1 hour
Shock	516.6	I, IV	When packing, drop 1.22 m height for 6 surfaces, 8 corners, 12 edges (total 26 drops)