General
| IC-F3032T/S | IC-F4032T/S | |||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136–174MHz |
400–470MHz |
||
| Number of channels |
128 channels/8 zones |
|||
| Channel spacing (Varies according to version) |
25/20/12.5 kHz |
|||
| Type of emission |
16K0F3E/14K0F3E/8K50F3E |
|||
| Current drain | Tx High |
1.5A (at 5W) |
1.6A (at 4W) |
|
| Rx | Stand-by |
75mA |
||
| Max. audio |
250mA |
300mA |
||
| Dimensions (projections not included; W×H×D) |
53×120×37 mm |
|||
| Weight (approx.) |
310g (With BP-232WP) |
|||
Transmitter
| IC-F3032T/S | IC-F4032T/S | |
|---|---|---|
| RF output power (at 7.2V DC) |
5W, 2W, 1W |
4W, 2W, 1W |
| Spurious emissions |
0.25μW (≤ 1GHz), 1.0μW (> 1GHz) |
|
| Frequency stability |
±2.5ppm |
|
| Audio harmonic distortion |
3% typ. (AF 1kHz 40% deviation) |
|
Receiver
| IC-F3032T/S | IC-F4032T/S | |
|---|---|---|
| Sensitivity at 20dB SINAD |
–4dBμV typ. emf |
|
| Adjacent channel selectivity (W/M/N) |
75/75/65dB typ. |
75/73/65dB typ. |
| Spurious response rejection |
70dB min. |
|
| Intermodulation rejection |
67dB typ. |
|
| AF output power (at 5% distortion with an 8Ω load) |
500mW typ. |
|
Function Comparison and Internal Unit Options
| IC-F3032T/S IC-F4032T/S | ||
|---|---|---|
| Number of option slots |
1 |
|
| CTCSS/ DTCS | encoder |
Available |
| decoder |
Available |
|
| 2-Tone | encoder |
Available |
| decoder |
Available |
|
| 5-Tone | encoder |
Available |
| decoder |
Available |
|
| DTMF autodial |
Available |
|
| DTMF decoder |
- |
|
| Voice Scrambler | Inversion |
- |
| BllS 1200 |
PTT ID only |
|
| MPT 1327 |
- |
|
| LTR™ trunking |
- |
|
| Man Down function |
UT-124R |
|
| Intrinsically safe |
- |
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage |
500.5 I |
| Low Pressure Operation |
500.5 II |
| High Temperature Storage |
501.5 I |
| High Temperature Operation |
501.5 II |
| Low Temperature Storage |
502.5 I |
| Low Temperature Operation |
502.5 II |
| Temperature Shock |
503.5 I-C |
| Solar Radiation |
505.5 I |
| Rain Blowing |
506.5 I |
| Rain Drip |
506.5 III |
| Humidity Induced |
507.5 II |
| Salt Fog |
509.5 |
| Dust Blowing |
510.5 I |
| Immersion |
512.5 I |
| Vibration |
514.6 I |
| Shock Functional |
516.6 I |
| Shock Transit Drop |
516.6 IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standard (IC-F3032T/S/F4032T/S, BP-232WP & HM-168LWP) | |
|---|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-232WP
- Belt clip, MB-94
- Antenna
(May differ according to version)
Close