Cloning software Download

Download the old version

Download Type Cloning software
Model name ID-5100A,ID-5100E
Version Revision 1.20
Update May.22.2015
Major changes

Improvements

  1. The number of repeater lists, Your Call Sign and GPS memory has been increased.
    - Repeater list: from 1200 (30 groups) to 1500 (50 groups)
    - Your Call Sign: from 200 to 300
    - GPS memory: from 200 to 300
  2. Auto Dimmer condition settings are added to keep or cancel the function.
    - An item is added to allow you to increase or not increase the LCD backlight level when you push the PTT button.
    - An item is added to allow you to increase or not increase the LCD backlight level when you receive a DV signal in the DV mode.
  3. A setting is added to select the desired [PTT] and microphone combination when the Bluetooth® headset is used.
    - An option is added to transmit audio on the connected microphone by pushing the [PTT] on the Bluetooth® headset.
    - An option is added to transmit audio on a Bluetooth® headset by pushing the [PTT] on the connected microphone.
  4. An option is added in the Tone setting to select separate tones for transmit and receive, such as CTCSS, DTCS, Tone frequency and code.
  5. An item is added to change the backlight brightness level according to the time setting.
  6. An item is added to mute the received audio on the SUB band when transmitting.
  7. An item is added to continuously display the power source voltage.
    1. CS-5100 Revision 1.20 can read icf files that are made by Revision 1.10 or earlier.
    2. Use the ID-5100 Release E3 firmware version to use the added features in CS-5100 Revision 1.20. Download the firmware here.
    3. Before downloading, thoroughly read ID-5100A/E Cloning Software Instructions for installation details and what is required for the installation.
Note
File Size 4.42MB
File Type zip
Manual manual download page

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of you using this download service and the equipment. You shall comply with applicable laws and regulatory requirements in the use of this download service and in the operation of the equipment.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. and its affiliates expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

You agree not to hold Icom Inc. and its affiliates responsible for any damage to your equipment operation or loss of data, or unauthorized use of the equipment, whether intentional or not, as a result of use this download service.